DJI Enterprise · Sensors and cameras
DJI Zenmuse L3
Top-class LiDAR with a 100 MP mapping camera for the Matrice 400: 1535 nm laser, up to 2,000 m range and centimetre accuracy for large areas.
- 1535 nm LiDAR, range up to 2,000 m (80% reflectivity)
- 3 cm vertical and 4 cm horizontal accuracy from 120 m
- 4/3 CMOS 100 MP mapping camera and dual RGB system
- Compatible with DJI Matrice 400
Buy online
16 370 € incl. VAT
- DJI Zenmuse L3 LiDAR scanner x1
- Protective case x1
- Lens cap x1
- Lens cleaning cloth x1
- SD card (1 TB) x2
Free delivery in Lithuania · Payment by bank transfer
Official manufacturer warranty · Training · Service in Lithuania
About the product
Description
DJI Zenmuse L3 is a next-generation LiDAR and mapping sensor designed for the DJI Matrice 400. It combines a 1535 nm laser rangefinder, a 100 MP mapping camera and two RGB cameras in a single gimbal, so one flight collects an accurate point cloud and colour imagery over large areas – from topography and mines to power line corridors.
01
Accurate LiDAR for large areas
The laser operates at a wavelength of 1535 nm (Class 1 safety): range reaches 700 m at 10% reflectivity and up to 2,000 m at 80% reflectivity. From 120 m, system point cloud accuracy is 3 cm vertical and 4 cm horizontal; from 300 m – 5 cm and 7.5 cm (RMSE). Pulse rate is adjustable from 100 kHz to 2 MHz, and up to 16 returns allow vegetation penetration. Power lines can be detected up to 300 m away.
02
100 MP camera and dual RGB system
The mapping camera with a 4/3 CMOS sensor takes 100 MP images (12,288 × 8,192) with a mechanical shutter up to 1/2000 s. Two RGB cameras together provide a 107° horizontal field of view, with an average GSD of 3 cm from 300 m. The same flight thus yields both a colourised point cloud and an orthomosaic.
03
Quick mounting and fieldwork
Zenmuse L3 attaches to the Matrice 400 via the DJI SKYPORT system with the L3 single gimbal connector. The sensor weighs 1.60 kg, is IP54-rated and operates from -20 °C to 50 °C. Data is stored on a CFexpress Type B card, flights are planned with DJI Pilot 2 and processing is done in DJI Terra.
Specifications
Compatibility
DJI Matrice 400 (with Zenmuse L3 single gimbal connector)
Laser
1535 nm, Class 1, divergence 0.25 mrad
Range
700 m @10% reflectivity (350 kHz); 2,000 m @80% reflectivity (100 kHz)
Power line detection
up to 300 m (21.6 mm steel-aluminium conductor)
Pulse rate and returns
100 / 350 / 1,000 / 2,000 kHz; up to 16 returns (100 and 350 kHz)
Scan modes
linear (80° × 3°), cross (80° × 80°), non-repetitive (80° × 80°)
Point cloud accuracy
3 cm vert. / 4 cm horiz. from 120 m; 5 cm / 7.5 cm from 300 m (RMSE)
Mapping camera
4/3 CMOS, 100 MP (12,288 × 8,192), mechanical shutter
Dual RGB system
107° combined horizontal field of view, GSD 3 cm from 300 m
Weight and dimensions
1.60 kg (without connector); 192 × 162 × 202 mm
Protection and temperature
IP54; operates from -20 °C to 50 °C
Software
DJI Pilot 2, DJI Terra, DJI Modify, FlightHub 2
Data formats
PNTS, LAS, LAZ, PLY, PCD, S3MB
Documents and specifications
Documents are provided from official manufacturer sources and open in a new window.
Video
Zenmuse L3 – launch video
Source: official DJI Enterprise YouTube channel. The video loads only after you press “Play”.
Our webinars and reviews
Unboxing the new DJI Zenmuse L3
Matrice 400 and Zenmuse L3: comparing LiDAR and photogrammetry solutions (webinar)
Source: our YouTube channel “GeoNovus – Trimble Lietuvoje”. The video loads only after you press “Play”.
Why Dronas.lt
Training included
We will help you get ready to work with the equipment.
Enquiry
Get a quote
Write to us — we will get in touch, confirm the configuration and send a commercial offer. No advance payment required.
Product
DJI Zenmuse L3
What happens next
1
We will contact you within 1 business day
2
We will discuss and confirm the configuration
3
We will send a commercial offer
Related products
You may also like
DJI Enterprise
Integrated LiDAR, 4/3 CMOS RGB camera and high-accuracy IMU for Matrice 350 RTK / 300 RTK: up to 5 returns, up to 1.2 million points per second and 4 cm vertical accuracy.
€13,000 incl. VAT
DJI Enterprise
Full-frame 45 MP aerial photogrammetry camera for Matrice 350 RTK and 300 RTK drones: 3 cm horizontal and 5 cm vertical accuracy without ground control points, interchangeable 24 / 35 / 50 mm lenses.
€5,900 incl. VAT
DJI Enterprise
Spotlight for Matrice 350 RTK and 300 RTK drones: up to 500 m illumination range at night, two beams (15° and 4°) and 35 lx at 100 m.
€1,300 incl. VAT